A Custom Containment Isolator designed to adapt to space constraints and GMP dispensing workflows.
This Custom Containment Isolator has been developed for OEB5 dispensing operations where maximum containment, operator safety and spatial adaptability must go hand in hand. Designed as a rigid isolator with an L-shaped configuration, it responds to layout requirements by naturally adapting to the available space and to the specific conditions of the production environment in which it is installed.
The isolator is composed of two interconnected chambers — a pre-chamber and a main dispensing chamber — arranged at an angle to create a tailor-made solution capable of meeting all operational needs.
An L-shaped architecture built around the process.
The defining feature of this Custom Containment Isolator is its L-shaped design, which allows the system to adapt to corners, walls, and existing structural constraints. This geometry enables a fully customized installation while maintaining OEB5 containment performance.
The pre-chamber functions as a controlled transition area for material introduction, tool entry, and preparation activities. The main chamber hosts the actual dispensing operations, including weighing and material handling under full containment conditions.
An intermediate door equipped with an inflatable seal separates the two chambers, ensuring effective segregation when required and reinforcing containment during critical transfer phases. Thanks to the inflatable gasket, the door provides a perfect seal while allowing smooth and unobstructed material transfer.
High containment performance with operational flexibility.
This rigid dispensing isolator operates under negative pressure, preventing the release of hazardous powders into the surrounding environment. It is also capable of performing inertization cycles, making it suitable for products or processes that require controlled atmospheres.
Inside the main chamber, sufficient space is available to accommodate balances, weighing systems and dispensing tools, ensuring ergonomic operation and excellent visibility through a large glass front equipped with glove ports. All internal surfaces are made of stainless steel and designed according to GMP criteria, with smooth finishes and easy-to-clean geometries. Connections to external equipment are ensured by dedicated cable pass-throughs.
Designed for safe and ergonomic material handling.
To support material handling activities, the isolator is equipped with a compact integrated lifter, allowing small drums to be loaded from below directly into the pre-chamber. This solution minimizes manual handling, reduces operator strain, and improves overall safety during drum positioning.
The Custom Containment Isolator is equipped with bag-in/bag-out systems, utility pass-throughs and process connections according to specific application requirements, ensuring seamless integration within the operating area.
Rather than adapting processes to standard machines, this Custom Containment Isolator allows dispensing operations to be shaped around the environment, the process, and the operator. Its L-shaped architecture, dual-chamber configuration and OEB5 performance make it a robust and flexible solution for pharmaceutical dispensing operations where safety, GMP compliance and space optimization are essential.
CSV Containment provides tailor-made solutions for pharmaceutical and fine chemical sectors in terms of containment. For more info: containment@csv-ls.com
